SUNFLEX

HORIZONTAL SLIDING WALLS

Large buildings and wide shop fronts can be closed and reopened conveniently and barrier-free across the entire area with the SUNFLEX horizontal sliding wall systems. The individual glass panels are not connected to each other. Thus, they can be parked in a space-saving manner not only at the ends, but in a position to be determined individually. Since the system does not require any bottom track, no connections are necessary in the floor area. This also makes them ideal room dividers and dividing walls.

SUNFLEX SF 40 HSW

Non-Insulated All-Glass System

The SF 40 HSW all-glass system without vertical profiles on the panel edges, consists of individual non-connected sliding panels not requiring a floor track. The system is also available with an integrated pass door panel with a lever-operated locking system and has a 29 STC sound rating.

SUNFLEX SF 40 HSW
SUNFLEX SF 40 HSW
SUNFLEX SF 40 HSW
SUNFLEX SF 40 HSW
SUNFLEX SF 40 HSW
SUNFLEX SF 40 HSW
SUNFLEX SF 40 HSW

SUNFLEX SF 50 HSW / SF 50c HSW
SUNFLEX SF 50 HSW / SF 50c HSW

SUNFLEX SF 50 HSW / 50c HSW

Non-Insulated Aluminum System

The SF 50 HSW non-insulated aluminum system is perfect for dividing large interior spaces that need to be closed and reopened repeatedly. The individual glass panels are not connected to each. Other and can be stored in a space-saving manner not only at the end of the wall but remotely. Since the system does not require any bottom track or connections in the floor making them ideal room dividers. The SF 50c HSW has wood cladding. Both systems have a 30 STC sound rating.

SUNFLEX SF 55 HSW / 55c HSW

Insulated Aluminum System

The SF 55 HSW sliding panels can be set individually in this thermally insulated aluminum system. A great variety of opening directions and panel layouts are feasible. As a result, the thermally insulated sliding wall can be utilized in virtually any area. The SF 50c HSW has real wood cladding. Both systems have a 30 STC sound rating.

SUNFLEX SF 50 HSW / 50c HSW
SUNFLEX SF 50 HSW / 50c HSW

SUNFLEX SF 75H HSW
SUNFLEX SF 75H HSW

SUNFLEX SF 75H HSW

Thermally Insulated Timber System

SF 75H HSW (Horizontal Sliding Wall) thermally insulated system is made of three laminated and bonded wood sections and is available in a full range of timber types and finishes. The system is also available with an integrated pass door panel with a lever-operated locking system.

VIDEOS / DOWNLOADS

SF 40 HSW – SF 75H HSW

HORIZONTAL SLIDING WALLS ANIMATION

MOVEABLE GLASS WALLS

The Sunflex Horizontal Sliding Wall (HSW) provides an indispensable innovative approach of organizing space by allowing the introduction of moveable wall entrances, internal partitions or display areas.

PRODUCT BROCHURE

Horizontal Sliding Walls Brochure

SPEC SHEETS

Learn more about the Sunflex Horizontal Sliding Walls.
Send us your proposed design and layout,
and get a free consultation specific to your project requirements.

SPECIFICATIONS

System SF 40 HSW

All-glass construction without vertical panel frames
Tempered safety glass panes 3/8“ (10 mm) or 1/2“ (12 mm) may be fitted
Sound transmission control STC 29 (based on standard single pane glass
System durability is ensured by the use of maintenance-free as well as fault-free fittings
Subsequent glass exchange on site is possible

System SF 50 and SF 50c HSW

Horizontal sliding wall made of non-insulated aluminum profiles
The system is internally glazed as standard and can accommodate glazing thickness of 1/4“ (6 mm) to 1 1/2“ (38 mm)
Sound transmission control STC 30 (based on single pane glass)
SF 50c H-S-W with solid wood cladding interior optionally available

System SF 55 and SF 55c HSW

Horizontal sliding wall in insulated aluminum profiles
The system is internally glazed as standard and can accommodate glazing thickness of 1/4“ (6 mm) to 1 1/2“ (38 mm)
Sound transmission control STC 30 (based on single pane glass)
SF 55c H-S-W with solid wood cladding interior optionally available

System SF 75 HSW

Horizontal sliding wall in insulated aluminum profiles
Glazing thickness up to 1 1/2“ (38 mm) possible
System durability is ensured by the use of maintenance-free as well as fault-free fittings
Key and slot groove panel joints ensure additional security and warp protection

SUNFLEX